Installation Technologies

UNISORB P. O. Box 1000 Jackson, MI 49204-1000 888 4-UNISORB (486-4767) 517 764-5607 FAX

UNISORB® V-100® Epoxy Grouts

UNISORB® V-100® Epoxy Grouting materials offer solutions for specific machinery grouting needs.

	Standard V-100® Epoxy Grout	A superior quality product with excellent flowability, high resistance to impact, and extremely rapid cure times. It is an excellent choice where very high strength and low grout quantities are preferred.
	Deep Pour™ V-100® Epoxy Grout	A highly flowable product intended for use where larger pours up to 8" deep are required, providing excellent compressive strength and rapid cure time.
	Adhesive V-100® Epoxy Grout	A product developed to be used as a trowelable adhesive to place under steel plate, bonding them to concrete floors. This can be used in either temporary or permanent installations. This product bonds to most surfaces.
	DCR™ V-100® (Acid Resistant) Epoxy Grout	A product designed for rail installations which require extraordinarily high strengths combined with resistance to temperature, humidity, acid and chemical environments. This product will allow pours with 3/4" to 8" cross sections.
	CR Hi-Flow™ V-100® Epoxy Grout	A product designed for crane rail and other extraordinarily severe applications where ultra high strength combined with resistance to temperature and humidity are important.
	Joint Filler V-100® Epoxy Grout	A product developed for sealing the exposed edge of inertia block isolation material at the floor level. It cures to a flexible solid state, preventing transmission of vibrations while protecting the edge of the isolation pad.
	Hi-Temp™ V-100® Epoxy Grout	A product designed for applications where high mechanical strength and high temperature resistance over regular epoxy grout is required. It has a maximum service temperature of 325° F.
	Xtra-Temp™ V-100® Epoxy Grout	A product developed for applications where high mechanical strength and very high temperature resistance are required. It has a maximum service temperature of 425° F.
	Low-Temp™ V-100® Epoxy Grout	A product developed for applications where high mechanical strength is required, and where low temperatures are encountered while mixing and pouring. It performs best at temperatures between 45°-65° F.
	Grout Forms	Ready to use plastic grout forms that eliminate on-site form construction. Easy to place and remove.

Technical Support Reading

The following documents are provided in Adobe® Portable Document Format (PDF) and require Acrobat Reader™ for viewing.